manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 354 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 354

Chapter 8  USING OPTIONS AND EXTERNAL DEVICES 

 

8-3

 

Option Unit 

Connecting 

This section explains procedure of mounted options to take printer/FDD unit for example. 

 

1. 

Make sure that the power to the instrument is turned OFF. 

 

  WARNING 

 

Do not connect the printer/FDD unit while the power to the instrument is ON. 

Failure to observe this may result in an electric shock. 

 

For the method of turning OFF the power, refer to page 3-107. 

 

2.

  Remove the cover from the expansion port located on the rear panel of the 

instrument. 

 

 

 

 

 

 

 

Keep the removed cover in a safe place to prevent it being lost. 

Caution 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments