manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 123 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 123

Chapter 3  PERFORMING MEASUREMENTS 

 

3-16

 

Changing the Distance Range 

The distance range can be changed as explained below. 

♦

 Example: “40km” 

→

 “80km” 

 

•

The distance range cannot be changed if “AUTO RANGE” has been selected for 

AUTO SET. 

•

A distance range that is longer than the optical fiber to be measured must be set. 

Correct measurement will not be possible if a distance range shorter than the 

optical fiber is set. 

•

The larger the distance range, the longer the measurement time. 

 

 

1.

  Locate the cursor to “Dist. RANGE” by using the rotary knob or the arrow key. 

 

 

 

 

 

 

 

 

 

 

 

 

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments