YOKOGAWA AQ7260 OTDR User Manual Download Page 124

Page: 124 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-17

Press

[ENTER].

A selection window will appear.

The distance ranges that can be selected vary with the optical module and

wavelength used. The table below shows the distance ranges that can be selected

in the case of AQ7264 optical module.

Locate the cursor to “80km” by using the rotary knob or [

] / [

Press [ENTER] to register the change made to the distance range setting.

Press [F4] (DONE) to register the changes made to the measurement

conditions.

•

When a new distance range is set, appropriate pulse width and attenuation will be

set automatically.

•

When changing the condition for two or more items, it is recommended to change

the condition for each item first and then press [F4].

Refer to the notes given on changing the measurement conditions (page 3-50).

TIP

Refer

TIP

Wavelength 1.31µm 1.55µm

2km 2km

5km 5km

10km 10km

20km 20km

40km 40km

80km 80km

160km 160km

240km 240km

320km 320km

Selectable

distance ranges

640km

Shorter

Longer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 124 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: