manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 48 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 48

Chapter 1  BEFORE USING THE INSTRUMENT 

 

 

1-21

 

Attaching a New Battery Pack 

This section explains how to attach a new battery pack. It is assumed that the battery pack 
bracket has been removed. 

 

1.

  Make sure that the power to the instrument is turned OFF. 

  WARNING 

 

Do not replace the battery pack while the power to the instrument is ON. 

Failure to observe this may result in electric shock or breakdown. 

 

 

For the method of turning OFF the power, refer to page 3-107. 

 

2.

  Insert a new battery pack into the instrument. 

 

 

 

 

 

 

 

 

 

Make sure that the battery pack is inserted in the correct direction. 

 

 

Refer 

Caution 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments