manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 322 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 322

Chapter 7  USING USEFUL FUNCTIONS 

 

7-27

 

7.7

 

Changing the Distance Reference 

Normally, the instrument considers the distance reference to be the connection point 
between the instrument and the optical fiber to be measured, and calculates all the 
distance data, such as cursor position and marker positions, based on the distance 
reference. 

This instrument allows you to change the distance reference freely. The distance 
reference is always displayed as “0km”. 

This section explains how to change the distance reference. 

 

 

 

 

 

 

 

 

I wonder if I could change the 

display position of “0km”.

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments