TM 11-6625-3145-14
Operating Instructions-318/338 Service
ACQ Test. To enter this test, press 4 while in the Diagnostics menu. This test is for acquisition RAM. Refer to the
Diagnostics menu or to the trouble-shooting tree in
Figure 3-13 illustrates the ACQ test.
operation: Press START to begin this test. The LOOP test and DISP ON/OFF functions are available here. The LOOP
test has four features: OFF, 1/0, ERROR, and TEST. You can select these features by pressing SELECT
even during testing. DISP can also be selected during testing. If DISP is set to OFF, no results will appear on
the screen other than results of the 1/0 LOOP test. To exit this menu, wait until the test is complete, or press
STOP, and then press X.
If errors are detected in the test and DISP is ON, some of the following error codes will appear on the screen.
Error codes: 30, 31, 32, 33 (Refer to
SQRAM Test. To enter this test, press 5 while in the Diagnostics menu. This test is for the trigger sequencer RAM.
Refer to the Diagnostics menu or to the trouble-shooting tree in
for details. Figure 3-14 illustrates the SQRAM
test.
operation: Press START to begin this test. The LOOP test and DISP ON/OFF functions are available here. The LOOP
test has four features: OFF, 1/0, ERROR, and TEST. These can be selected by pressing SELECT even
during testing. DISP can also be selected during testing. If DISP is set to OFF, no results will appear on the
screen other than results of the I/O LOOP test. To exit this menu, press X after the test finishes or after
pressing STOP. If errors are detected in the test and DISP is ON, some of the following error codes will
appear on the screen.
Figure 3-13. Display for acquisition RAM (ACQ) test.
Figure 3-14. Display for trigger sequencer RAM (SQRAM)
test.
3-11
Summary of Contents for 318
