TM 11-6625-3145-14
Verification and Adjustment Procedures-318/338 Service
CHECK 4.
THRESHOLD VOLTAGE
1.
Connect all the data and ground leads of the P6451 Parallel Data probes (Pods A through D) together and connect
them to the instrument ground.
2.
Press the THRESHOLD menu key (normal operating mode).
Threshold Level TTL
a.
Set INPUT Thresholds to TTL for Pods A through D.
b.
Press the START key. The trigger position (indicated by T) will be displayed on the screen. The trigger position
will be <T= 7W>, <T = 127W>, or <T = 247W> depending on the trigger position setting in the Trigger menu
(begin, center, or end).
c.
Check that all data acquired are O’s.
Threshold Level V1
a.
Set Threshold LEVEL V1 to +0.3 V.
b.
Set Pods A through D equal to V1.
c.
Press the START key. The trigger position displayed on the screen will be <T=7W>, <T=127W>, or <T=247W>
depending on the trigger position setting in the Trigger menu.
d.
Check that all data acquired are O’s.
e.
Set Threshold LEVEL V1 to -0.3 V.
f.
Press the START key. The trigger position displayed on the screen will be <T=7W>, <T=127W>, or <T=247W>
depending on the trigger position setting in the Trigger menu.
g.
Check that all data acquired are l’s.
Threshold Level V2
a.
Set Threshold LEVEL V2 to +0.3 V.
b.
Set Pods A through D equal to V2.
c.
Press the START key. The trigger position is displayed on the screen will be <T=7W>, <T=127W>, or <T=247W>
depending on the trigger position setting in the Trigger menu.
d.
Check that all data acquired are O’s.
e.
Set Threshold LEVEL V2 to -0.3 V.
f.
Press the START key. The Trigger position displayed on the screen will be <T=7W>, <T= 127W>, or <T=247W>
depending on the trigger position setting in the Trigger menu.
g.
Check that all data acquired are 1’s.
5-66
Summary of Contents for 318
