Shibaura ST330, Workshop Manual

Page: 82 / 250

72
5. WHEEL ALIGNMENT
Inspection and service
1. Toe-in
When the steering link system is disassembled, perform the
wheel alignment by adjusting the length of the tie rod.
Standard assembling value
A － B = － 5 ～ + 5 mm
(Inclination angle of king pin, caster and camber fixed)
NOTE: Tighten torque of the lick nut of the tie rod is 125
N ･ m (13kgf ･ m).
2. Steering angle
Standard assembling value
54 － 56 ° (inside)
(outside 45 ° )
NOTE : To ensure correct steering operation the stopbolt
should protrude a minimum of 23 mm from the
casing.
323Y
324Y
6. FRONT WHEEL
1) Specifications
ST330 ・ ST333
Tire size Rim size
（
AG
）―
Option 6-14 5J-14
（
AG
）―
Standard
7-14 5J-14
（ TURF ）― Standard 25 × 8.50-14 7JA-14
2) Inspection of Tire
4WD
Tire size 6
－
14 7
－
14 25
×
8.5
－
14
1. Wear of tire (mm)
● Lag height when new
● Lag height in service limit
28
14 28
14 8.5
4
2. Tightening Torque of Disk N·m {kgf·m}
75 － 95 {7.7 － 9.6}
3. Rim run-out (mm) Service limit within 5
4. Air pressure of tire See Operator’s Manual