Shibaura ST330, Workshop Manual

Page: 21 / 250

17
(
7) SUCTION TUBE, RETURN TUBE
①
Loosen the hose clamp, and remove the suction tube,
from the filter.
② Remove the banjo bolt, with O-ring and remove the
return tube.
③ Loosen the hose clamp and remove the bolt, and suction
tube.
④ Remove the clamp, banjo bolts and piping for oil cooler
and oil filter circuit.
(8) MID PTO, REAR PTO AND RANGE GEAR
CHANGE LEVER ASSEMBLY
① Remove the split pins and separate the shift plates from
the mid PTO, rear PTO change lever and range gear
change lever.
② Remove the mid PTO, rear PTO and range gear change
lever as an assembly from the rear axle housing and
cylinder housing.
(9) FRONT WHEEL DRIVE CHANGE LEVER
③
Remove the sprit pin.
④ Drive out the roll pin from the front drive change
lever.
⑤
Remove the front drive change lever assembly from the
transmission housing.
9 × 3 Shown
035Y
HST Shown
036Y
HST Shown
037Y
038Y