Shibaura ST330, Workshop Manual

Page: 138 / 250

128
( 10) Mid PTO counter shaft
①
Drive in the screwdriver to the seal cover, 8, and
remove seal cover and discard it.
②
Drive out the counter shaft, 1, to rearward.
③ Remove bearing, 9, from the counter shaft, 1,.
④ Take out the collar, 4, and fixed gear, 3.
⑤
Remove the bearing, 6, and snap ring, 5, in the
housing.
⑥
Remove the bearing, 2, from the housing.
(11) Shift arm
①
Drive out the spring pin, 2, and remove the change
lever, 1.
②
Remove the plate, 4, and remove the shift arm, 6,
from the inside of the case.
(12) Mid PTO gear case
① Remove the gear box fixing bolt and remove the
mid PTO gear case assembly.
432Y
433Y
434Y
1. MID PTO
Counter shaft
2. Bearing (6026:NR)
3. Fixed gear
4. Collar
5. Snap ring (
φ
52)
6. Bearing (6205)
7. Snap ring ( φ 62)
8. Seal cover
9. Bearing (6206)
1. Change lever
2. Spring pin
3. Bolt
4. Plate
5. O-ring (P14)
6. Mid PTO shift arm