Shibaura ST330, Workshop Manual

Page: 148 / 250

138
NOTE:
Remove the dashboard, cover, and meter ass'y referring to 1-5, Removal of outside.
1. MAIN CHANGE LEVER ASS’Y
1) Disassembly
a. Remove the snap rings ① and drive out the pin,
②
and separate the main change lever ass'y
③
from the shift arm ④ .
NOTE
：
When removing the snap ring, do not expand it to
more than
φ 24 in bore since the tightening force
decreases.
438Y
b Remove the snap ring ⑤ , washer ⑥ , and spring ⑦ , from the shift arm ④ .
c. Remove the snap pin ⑧ , washer ⑨ , and pin ⑩ , from the change lever, ⑪ .
d. Draw out the change lever ⑪ , and shift arm ④ , from the steering column ⑫ .
5. Remove the shims ⑬ shift arm ⑭ , and bushes ⑮ from the steering column.
439Y
3
－
6 Change Lever Linkage