Shibaura ST330, Workshop Manual

Page: 150 / 250

140
2. RANGE SHIFT, PTO AND 4WD CHANGE LEVER
(Remove the covers referring to 1-5, Removal of outside.)
1) Disassembly and reassembly
(1) Range shift and PTO change lever
①
Remove the split pins, 19, from each change lever, and separate the shift plates, 8, 9 and 11.
② Remove two bolts, 10, for the bracket.
③ Remove the change lever assembly as a set by turn the shaft, 1.
(2) 4WD change lever
① Remove the split pin, 19, and remove the 4WD change lever, 14, from the shift arm.
442Y
1. Shaft; shift guide
2. Snap ring
3. Bushing
4. Change lever
；
range shift
5. Change lever ； PTO
6. Change lever
；
mid PTO
7. Change lever ； rear PTO
8. Shift plate ； range shift
9. Shift plate
；
PTO (one speed)
10. Bracket
11. Shift plate
； mid PTO
12. Change lever ： range
13. Safety switch (mid PTO
ｰ
only)
14. Change lever ； 4WD
15. Bush
16.
Lever Guide
17. Bush
18. Change lever
；
PTO
19. Split pin
NOTE : Reassemble units in the reverse order to disassembly