Tel: 886.909 602 109 Email: [email protected]
164
[One Port@S22]
Select calibration of one port@S22.
[Full 2 Ports]
Select calibration of full 2 Ports.
[Reflect]
Set reflection measurement for calibration of full 2 ports.
[P1 OPEN]
Select the calibration standard of OPEN for P1.
[P1 SHORT]
Select the calibration standard as close device on port 1.
[P1 LOAD]
Select the calibration standard of LOAD for P1.
[P2 OPEN]
Select the calibration standard of OPEN for P2.
[P2 SHORT]
Select the calibration standard as close device on port 2.
[P2 LOAD]
Select the calibration standard of LOAD for P2.
[Tr]
Set transmission measurement for calibration of full 2 ports.
[Auto Meas]
Calibrate translation automatically.
[Pos Trans]
Measure positive translation.
[Pos Match]
Measure positive matching.
[Rev Trans]
Measure reverse transmission.
[Rev Match]
Measure reverse matching.
[Iso]
Set isolation measurement for calibration of full 2 ports.
[Auto Meas]
Calibrate isolation automatically.
[Ignore Iso]
Ignore isolation item.
[Pos Iso]
Measure positive isolation.
[Rev Iso]
Measure reverse isolation.
