Tel: 886.909 602 109 Email: [email protected]
55
[1×2], [1×3], [2×1], [3×1] and [4×1].
[Trace Math>]
Open the math menu of the trace.
[Data]
Display current test data.
[Save]
Display test data stored in a memory.
[Data&Mem]
Display both current and in-memory test data.
[Data-Mem]
Display the difference between current and in-memory test data.
[Data+Mem]
Add current and in-memory test data together.
[Data/Mem]
Divide current test data by in-memory test data.
[Data->Mem]
Save current test data to memory.
[Limit]
The limit line may be edited or displayed and tested to see if it is passed.
[Alarm Off On]
Warning sounds when the limit line fails.
[Limit Off On]
Test switch for limit line.
[Edit>]
Edit the limit line.
[Sel Point]
Select the name of current limit point to be edited.
[Pos]
Set the horizontal axis for certain limit point of the limit line.
[Value]
Set the amplitude of a certain frequency point of the limit line.
[Add]
Add a frequency point.
[Delete]
Delete a frequency point.
[Clear]
Clear all limit points.
[Save]
Store the limit line.
[Recall>]
