Tel: 886.909 602 109 Email: [email protected]
57
[Sub Peak]
Move the active marker to the next highest point that is associated with the current marker position on
the trace.
[Right Peak]
Find the next peak to the right of the current marker position.
[Left Peak]
Look for the next peak to the left of the current marker position.
[Advance]
A dialog box will pop up for setting the search type and mode of multiple markers.
[Tracking Off On]
Set marker tracking to on or off state.
[Calibrate]
[Cal Off On]
Turn the error correction on or off, and the calibration can only be turned on when the corresponding
calibration is completed.
[Cal Kit]
Select the type of calibration kit for mechanical calibration.
[31123]
Select a 2.4mm calibration kit.
[31121]
Select a 3.5mm calibration kit.
[31101]
Select the 50Ω coaxial calibration kit.
[M Cal>]
Select the calibration mode.
[Freq Resp.]
Select frequency response calibration.
[OPEN S11 (S22)]
Select the calibration standard of S11 or S22 OPEN.
[SHORT S11 (S22)]
Select the calibration standard of S11 or S22 SHORT.
[THRU S12 (S21)]
Select the calibration standard of S12 or S21 THRU.
[OPEN]
Select the calibration standard of OPEN.
[SHORT]
Select the calibration standard of SHORT.
[LOAD]
Select the calibration standard of LOAD.
[Resp. & Iso S12 (S21)]
Select response and isolation calibration.
