Tel: 886.909 602 109 Email: [email protected]
7
Chapter II User instructions
Thanks for using the S5105 series microwave multifunctional analyzer. Please read this chapter
carefully to avoid any instrument damage or accident due to maloperation. In case of any problem,
please contact us in time for quick solution.
Section 1 Unpacking inspection
Unpack, and check and verify the items in the box as per the steps shown below; read the “Section 2
Power-up precautions” of the chapter first before operation, so as to find problems in the first place and
avoid any accident. In case of any problem, contact us immediately for quick solution.
1 Inspection steps
a) Check whether the packing case and cushioning material are squeezed.
b) Keep the original packing materials for transportation in the future.
c) Take the instrument out of the packaging box, and check for any damage caused during
transportation.
d) Check whether the instrument model is correct and all accessories and documents are
provided together with the instrument as per the packing list.
In case of any damage to the packaging box or damping material in the box, check first for any item
damaged inside, and then conduct the electrical performance test on the instrument.
2 Accessories and documents required in the packing case
a) Power cable, 1 pc.
b) AC-DC adapter, 1 pc.
c) Rechargeable lithium battery, 1 pc.
d) USB port cable, 1 pc.
e) CD, 1 pc.
f)
Certificate of quality, 1 pc.
In case of any accessory missing or damage to the instrument occurred during transportation, inform us
for quick repairing or replacement as required. Keep the transport materials for packing and
transportation in the future. For handling method, see “after-sales services of the microwave analyzer”.
NOTE:
The product is the electronic one, which is listed in the national
hazardous waste directory after being scrapped. Do not put it into the
garbage can after scrapping. Dispose the product as per national and
local laws and regulations. Contact the manufacturer for disposal if
necessary.
Section 2 Precautions before Power on
1
Power supply requirement
The S5105D/E/F microwave analyzer is available with the following three types of power supply:
a) Power supplied from AC with an adapter adopted for conversion
The AC-DC adapter provided together with the instrument must be used when the AC power
supply is adopted. The 220V/50Hz AC power is input to the adopter. It is suggested to adopt the
!
