Tel: 886.909 602 109 Email: [email protected]
12
Chapter III Basic quick start
The chapter introduces the basic quick start for the S5105D/E/F microwave analyzer for guiding users
to quickly understand the basic operation method of the S5105D/E/F microwave analyzer.
Section 1 Correct Use of Connectors
Connectors are deemed to be used during various tests via the microwave analyzer, and the following
precautions must be paid attention to in respect of connector operation:
1 Connector check
When conducting connector inspection, anti-static wrist band should be worn. It is recommended to
check the following items carefully:
a)
Whether the electroplated surface is worn or not and whether there are deep scratches;
b)
Whether the thread is deformed;
c)
Whether there are metal particles on the threads and the joint plane of the connector;
d)
Whether the inner conductor is bent or broken;
e)
Whether the screw sleeve of the connector rotates improperly.
WARNING!
Any damaged connector may damage the good connector connected
to it even when measuring the connection for the first time. In order to
protect each interface of the microwave analyzer itself, the connector
must be checked before connector operation.
2
Connection method
Before the connection, the connectors should be inspected and cleaned to ensure cleanness and
intactness. Anti-static wrist straps should be worn before connection. The correct connection method
and steps are as follows:
a)
As shown in Figure 3 -1, align the axes of the two interconnecting devices to ensure that the pin
of the male connector slides concentrically into the socket of the female connector.
Figure 3-1 Axes of interconnected devices in a straight line
b) As shown in Figure 3 -2, push the connectors straight together so that they can be
smoothly engaged. Rotate the screw sleeve of the connector (note, not the rotating connector
itself) until it is tightened, and there can be no relative rotational movement between the
connectors during the connection.
Rotate Nut
Hold
Figure 3 -2 Connection method
