Tel: 886.909 602 109 Email: [email protected]
154
b)
User can also type the average number of times he/she wants to set with figure key, and press [OK]
to complete.
Section 5 Menu Description
This Section introduces the menu structure and menu details of power monitoring mode of
S5105D/E/F microwave analyzer.
1
Menu Structure
The power monitoring mode mainly includes four groups of menus: Frequency, Amplitude, Bandwidth
and File. The File refers to the file management of basic operation for the equipment. The menu
structure is as follows:
Freq
Span
Start Freq
Span
Center Freq
Maxi span
Center Freq
Min span
Span
>
Span Pre
Step Freq
Auto Man
Back
Amplitude
Ref Level
0.0dBm
Preamplifier
Off On
Auto Scale
Max scale
Min scale
Relative
Off On
Offset
Off On
BW/Avg
RBW
Auto Man
VBW
Auto Man
SPAN/RBW
100
RBW/VBW
1
Avgs
Off On
Figure 7-1 Structure of Frequency, Amplitude and Bandwidth Menu
2
Menu Description
【
Frep
】
A frequency-related menu pops up, including [Center Freq], [Span], [Start Freq], [Stop Freq], [Step Auto
Man].
[Center Freq]
Activate the center frequency and set it to the center frequency/span mode. The center frequency can be
adjusted with the figure keys, step keys or rotary knob. The step keys and the rotary knob will change
according to the step frequency. If the center frequency set is not in harmony with the current span, the
span will be automatically adjusted to the best value corresponding to the center frequency.
[Span]
Activate the span function and set it to the center frequency/span mode. Press [Span] to simultaneously
pop up [Span] , [Max Span] , [Min Span] , and [Last Span] . The span can be adjusted by the figure keys,
step keys or the rotary knob, and step keys and the rotary knob change in steps of 1, 2 and 5.
[Max Span]
Set to center frequency/span mode and set the span to a maximum of 100MHz.
[Min Span]
