Tel: 886.909 602 109 Email: [email protected]
29
7
File Management Menu Description
[File]
[Save State]
Save current sweep status parameters.
[Recall Status>]
Read the file saved with state parameters, and recall relevant state parameter for current sweep.
[Page Up]
Turn the page upward and view the saved state file.
[Page Down]
Turn the page downward and view the saved state file.
[Recall]
Recall the selected state file, and reset the state as per the file content.
[Delete]
Delete the selected state file.
[Del All]
Delete all state files saved in the spectrum analyzer mode.
[Last State]
Click to restore to the last state before shutdown.
[Default State]
Click to restore to the factory setting.
[Save Trace>]
Save the trace data.
[Trace]
Save current trace to be the default format.
[Data (.s1p)]
Save current trace to s1p, which is the original complex number data of the S-parameter measured for
current trace. The saving format can be further selected, which cannot be used for instrument recalling,
but can be viewed by the upper computer in the txt format.
[Data (.s2p)]
Save current trace to s2p, which is the original complex number data of the full S-parameters. The
saving format can be further selected, which cannot be used for instrument recalling, but can be viewed
by the upper computer in the txt format.
[Data (.csv)]
Save the data from current trace format conversion, which cannot be used for instrument recalling, but
can be viewed by the upper computer in the txt format.
[Recall Trace]
Recall the trace data.
[Recall]
Recall the selected trace data.
[Page Up]
Turn the page upward and view the saved trace file.
[Page Down]
