Tel: 886.909 602 109 Email: [email protected]
21
a) Click [System]→[Info] to pop up the instrument serial number window, displaying such version
information as the product model, serial number, application program and firmware program.
b) Click
【
OK
】
to close the window.
2
Self test
The S5105D/E/F microwave analyzer is provided with a self test function, which can test the
working status and internal environment temperature of each component in the microwave
analyzer and provide test information after the self test program is activated.
Follow the step below to conduct the self test:
a) Press [System]→[Self Test] to enable the self test program. The test result window will pop up after
the self test;
b) Click
【
OK
】
to close the self test result window.
3
Set sleep mode
The S5105D/E/F microwave analyzer is provided with the power saving mode (including the auto
sleep mode and auto shutdown mode), so as to prolong the operating time when the power is supplied
via the battery. If no operations are conducted in the sleep time set with the auto sleep mode
enabled, the microwave analyzer will enter the sleep status, including such operations as closing the
LED display and cutting off internal module power supply. Press any key to let the microwave analyzer
exit from the sleep mode and switch to the normal operation mode. The instrument will pop up a
countdown prompt 30 s before entering the sleep status, and user’s any operation will cancel such
sleeping process. The time range of auto sleep is 1-600 min.
a) Press [System]→[Power Saver], which is disabled in the sleep mode.
b) Click [Sleep Off] to enable the sleep mode.
c) Enter the sleep time to be set via the figure key, and press the time unit to confirm.
4
Set auto shutdown
When the auto shutdown mode is on, the instrument starts to time it, and shuts down automatically when
the time set for auto shutdown is reached. The instrument will pop up a countdown prompt 10 s before
entering the shutdown status, and user cancel such shutdown process as per the prompt. The time
range of auto shutdown is 15-1,200 min.
a) Press [System]→[Power Saver] to enter the setting menu, and the auto shutdown function is
disabled by default.
b) Press the softkey to switch to [Shut Down Off], and enable the auto shutdown mode to show
current shutdown time.
c) Enter the shutdown time to be set via the figure key, and press the time unit to confirm.
5
Display mode and brightness adjustment
The microwave analyzer is provided with three screen display mode to facilitate user’s test in different
conditions, namely, the outdoor, night and normal modes. Users can also adjust the screen brightness
from five manual brightness adjustment levels as required.
a) Press [System]→[Display] to enter the display mode and brightness adjustment menu.
b) Switch current display mode as per corresponding modes.
c) Press [Brightness Auto / Man] to switch to the brightness adjustment mode. If in the manual mode,
the brightness adjustment dialog box will pop up. Drag the scroll bar or use the rotary knob or
up/down key to set the brightness.
6
GPS function
The S5105D/E/F microwave analyzer is provided with the GPS function for viewing such information
as the receiver status, number of satellites in use, latitude and latitude hemispheres, longitude and
longitude hemispheres, altitude and UTC date/time.
a) Press
【
System
】
→[GPS] to open the GPS function menu.
