Tel: 886.909 602 109 Email: [email protected]
116
[OBW]
Pop up function menu for occupancy measurement, including [OBW Off On], [Method % dBc], [%
99.00%], [XdB -3.00], [Span], etc.
[OBW Off On]
Turn on or off the occupied bandwidth measurement function, and the default state is off.
[Method % XdB]
Choose the measurement method, percentage or XdB.
[% 99.00%]
Set percentage.
[XdB -3.00]
Set the value of dBc. The default value is -3dB.
[Span]
Set the span for the occupied bandwidth measurement.
[ACPR]
A function menu of the ACPR measurement pops up, including [ACPR Off On], [Center Freq], [Main Ch
BW], [Adj Ch BW], [Ch Space] etc.
[ACPR Off On]
Turn the adjacent channel power ratio function on or off, and the default state is off.
[Center Freq]
Activate the center frequency and set it to the center frequency/span mode. The center frequency can be
adjusted with the figure keys, step keys or rotary knob. The step keys and the rotary knob will change
according to the step frequency. If the set center frequency is not coordinated with the current span, the
span will automatically adjust to the optimum value for the desired frequency.
[Main Ch BW]
Set the bandwidth measured by the main channel.
[Adj Ch BW]
Set the adjacent channel bandwidth.
[Ch Space]
Set the offset of the adjacent channel center frequency relative to the main channel.
[IA]
A function menu of the interference analysis measurement pops up, including [IA Off On], [Mode Spec
Wtf], [Red Limit], [Blue Limit], [Clear] etc.
[IA Off On]
Turn on or off the interference analysis function. The default state is off.
[Mode Spec Wtf]
Switch interference analysis mode, spectrum or waterfall chart.
[Red Limit]
When setting the curve drawing, the amplitude value corresponding to the limit red is used when
converting the amplitude to color.
[Blue Limit]
When setting the curve drawing, the amplitude value corresponding to the limit blue is used when
converting the amplitude to color.
[Clear]
