Tel: 886.909 602 109 Email: [email protected]
145
Set number of sweep points
[Swp Mode Lin List]
Set the sweep mode to linear or list. When the sweep mode is set to list, frequency sweep will be
performed according to the selected list setting, including single-segment sweep and full-segment
sweep. The list should be edited before selecting this mode. The frequency axis of the list sweep is
equally divided by the number of displayed points.
[List info Off On]
Show or hide list information.
[Edit List>]
Edit the sweep list, including the start frequency, stop frequency, points, output power and IF BW of each
frequency band.
[Add Seg]
Add a sweep segment.
[Del Seg]
Delete a sweep segment.
[Del All]
Delete all list information files.
[Start Freq]
Set start frequency of this segment
[Stop Freq]
Set stop frequency of this segment
[Points]
Set number of sweep points of this segment
[IF BW]
Set the IFBW of this segment
[Trace]
[Trace 1]
Illuminate the current window to display the trace as the display window for trace 1.
[Trace Num 1×1>]
Select the number of traces and the arrangement of traces to be displayed in a window, including [1×1],
[1×2], [1×3], [2×1], [3×1] and [4×1].
[Trace Math>]
Open the math menu of the trace.
[Data->Mem]
Save current test data to memory.
[Data]
Display current test data.
[Save]
Display test data stored in a memory.
[Data&Mem]
Display both current and in-memory test data.
[Data-Mem]
