Tel: 886.909 602 109 Email: [email protected]
15
Set such parameters as the reference, ratio, max. and min. values, relative
measurement on/off status and offset in the power monitoring mode and USB Power
Meter mode. Set the preamplifier on/off status in the power monitoring mode.
3)
【
Bandwidth
】
Set such parameters as the average, smooth and IF BW in the antenna test mode and
vector network analyzer mode.
Set such parameters as measurement RBW, VBW, detector type and average in the
spectrum analyzer mode.
Set such parameters as obtaining speed and average in the power monitoring mode.
Set average parameter in the USB Power Meter mode.
4)
【
Mkr
】
Open the function menus relative to the marker in the antenna test mode and vector
network analyzer mode, including such settings as marker switching, enabling
and disabling, marker peak searching, delta marker, and marker function.
Open menus relative to the marker in the spectrum analyzer mode, including
such settings as marker switching, enabling and disabling, marker peak searching,
delta marker, counter and noise marker.
5)
【
Measure
】
Select the measurement data format in the antenna test mode, including VSWR,
return loss, impedance, cable loss, DTF VSWR and DTF return loss.
Select the required S-parameter measurement mode, data format and time domain in
the vector network analyzer mode.
Select different measurement functions, including field strength measurement,
channel power, OBW, AM/FM modulation and ACPR, and set the signal source power
output in the spectrum analyzer mode.
Set such parameters as measurement type, port selection, measurement format,
relative measurement on/off and output power in the vector voltage measurement
mode.
6)
【
Mode
】
Select the working mode of the microwave analyzer, including antenna test, vector
network analyzer, spectrum analyzer, power monitoring, USB power meter and
vector voltage measurement.
b) Power key
Start up and shut down the microwave analyzer for 3s respectively.
The indicator light of the power key is the instrument working status indicator, indicating the
power supply type and working status of the instrument, with the indicator light color and
corresponding instrument working status shown below:
1) If the microwave analyzer is connected an external power supply, not provided with battery,
provided with a battery with capacity of 100%, and in the shutdown status, the indicator
light is constantly on in yellow.
2) If the microwave analyzer is connected an external power supply, not provided with battery,
provided with a battery with capacity of 100%, and in the start-up status, the indicator light
is constantly on in green.
3) If the microwave analyzer is connected an external power supply, provided with a battery
with capacity of less than 100%, and in the shutdown status, the indicator light flashes in
yellow, indicating the microwave analyzer is charging the battery now. After charging fully,
the microwave analyzer stop charging, and the indicator light changes into yellow and is on
constantly.
