Tel: 886.909 602 109 Email: [email protected]
27
status. To recall the state set before last shutdown, press [File]→[Recall@State>]→[Last State]
;
to
recall the default system state, press [File]→[Recall@State>]→[Default State]
;
to recall the saved
state, press [File]→[Recall@State>]→[State File>] to pop up the state list dialog box, select the state
to be recalled directly via the up/down key, rotary knob or touchscreen, and then press [OK] or
[Recall] to complete the state recalling. Click [Delete] to delete the state selected in the list or [Del All]
to delete all states from the list.
2
Saving and recall trace
a) Press [File]→[Save Trace>], press [Trace] or [Data (.csv)] to select the binary format or .csv data
test format to pop up the file naming dialog box, set the file name, and press [OK] to complete
current measurement data saving. The binary format can be recalled in the instrument, whereas
the .csv text format cannot be viewed in the instrument, which can be viewed in the computer after
being copied via the U disk;
b) Press [File]→[Recall Trace] to recall the measurement trace data selected. Click it to pop up the
trace list dialog box, select the trace to be recalled directly via the up/down key, rotary knob or
touchscreen, and then press [OK] or [Recall] to complete the recalling. Click [Delete] to delete the
trace file selected in the list or [Del All] to delete all trace files from the list.
3
Print Screen
Press [File]→[Print Screen] to save the information shown on current screen to the instrument memory
in the image format with a pop-up file naming dialog box, set the file name, and press [OK] to complete
current print screen picture saving, with the default saving path of Inter Memory/Picture under the file
management.
4
File Management
Press [File]→[File Mgmnt] to delete or copy files.
Follow the steps below to delete the source file:
Select the file to be deleted in the source file directory, press [Delete Source File] to pop up a dialog box
“Delete the file selected or not?”, and click [Yes] to delete it.
Follow the steps below to copy the source file:
Press [Source File] to select the source file to be copied in the source file directory, and [Destination] to
select the directory to store the source file to be copied in the destination folder directory, press [Start
Copy] to pop up a prompt “Copied successfully
！
”, Press [OK] to complete the copying.
5
Save medium selection
Press [File]→[Location Int>] to select the location for saving the state file and trace file, which can be the
internal memory of the microwave analyzer, SD card or USB disk.
