Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 828 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
Parameter Description
Parameter
description
name
Define guard name
Default
Settings N/A
Command
mode NFPP configuration mode.
Usage
guidelines
This command takes effect only after the match, rate-out,
rate-limit and attack-threshold have been configured.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# define tcp enable
Command Description
Related
commands
show nfpp define
summary
Show the user-defined
anti-attack configurations
15.7.3 isolate-period
Use this command to set the isolate time.
isolate-period { seconds | permanent }
Parameter Description
seconds
Set the isolate time, in seconds. The
valid range is 0 or [30, 86400]. 0 for no
isolation.
Parameter
description
permanent
Permanent isolation.
Default
Settings
The default isolate time is 0, which means no isolation.
Command
mode
NFPP define configuration mode.