Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 234 / 1191

S2600E/P CLI Reference Guide Chapter 12 QinQ Configuration Commands
12.1.11 l2protocol-tunnel proto-type enable
Use this command to enable transparent transmission of L2 protocol message.
l2protocol-tunnel {stp | gvrp} enable
no l2protocol-tunnel {stp | gvrp} enable
Parameter Description
stp
Transparently transmit stp
message.
gvrp
Transparently transmit gvrp
message.
Parameter
description
no
Remove the settings.
Command
mode
Intereface configuration mode.
Examples
Here is an example of enabling transparent transmission of
L2 protocol message
:
Ruijie#configure
Ruijie(config)# interface fa 0/1
Ruijie(config-if)# l2protocol-tunnel gvrp enable
Ruijie(config-if)#end
Command Description
Related
commands
show l2protocol-tunnel
{gvrp|stp}
-
Platform
description
The software version must be RGOS10.3 and later.
12.1.12 l2protocol-tunnel proto-type tunnel-dmac mac-address
Use this command to set the MAC address for the transparent transmission of
the corresponding protocol messages.
l2protocol-tunnel
{
stp|gvrp
}
tunnel-dmac mac-
address
no l2protocol-tunnel
{
stp|gvrp
}
tunnel-dmac mac-address