Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 556 / 1191

S2600E CLI Reference Guide Chapter 4 802.1X Configuration Commands
Parameter Description
Parameter
description
seconds
Time (in seconds) for the device to wait
before reauthentication after the
authentication failure The range is from
0 to 65535, in seconds.
Default 10 seconds.
Command
mode Global configuration mode.
Usage
guidelines
When authentication fails, the solicitator must wait for a
period of time before reauthentication.
Examples
The following example sets the time for waiting
re-authentication to 1000s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout quiet-period 1000
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 3600 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 5 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Command Description
Related
commands
show dot1x Show the information about 802.1x.
4.2.2 dot1x timeout
re-authperiod
Use this command to set re-authentication interval when re-authentication is enabled. Use the