Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 150 / 1191

S2600E/P CLI Reference Guide Chapter 5 VLAN Configuration Commands
Command Description
switchport
access
Use this command to configure an
interface as a statics access port and
assign it to a VLAN.
Related
commands
switchport
trunk
Use this command to specify a native
VLAN and the allowed-VLAN list for the
trunkport.
5.1.5 switchport trunk
Use this command to specify a native VLAN and the allowed-VLAN list for the
trunk port. Use the
no
form of the command to restore the default setting.
switchport trunk
{
allowed vlan
{
all
| [
add
|
remove
|
except
]
vlan-list
}|
native vlan vlan-id
}
no switchport trunk
{
allowed vlan
|
native vlan
}
Parameter Description
allowed vlan
vlan-list
Configure the list of VLANs allowed on
the trunk port.
vlan-list
can be a VLAN
or a range of VLANs starting with the
smaller VLAN ID and ending with the
larger VLAN ID and being separated by
hyphen, for example, 10 to 20. The
segments can be separated with a
comma (,), for example, 1 to 10, 20 to
25, 30, 33.
all
means that the allowed VLAN list
contains all the supported VLANs;
add
means to add the specified VLAN
list to the allowed VLAN list;
remove
means to remove the specified
VLAN list from the allowed VLAN list;
except
means to add all the VLANs
other than those in the specified VLAN
list to the allowed VLAN list;
Parameter
description
native vlan
vlan-id
Specify the native VLAN.
Default
configuration
The default allowed-VLAN list is all the VLANs, the default
native VLAN is VLAN 1.