Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 791 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
Default
Settings By default, the isolate period is not configured.
Command
mode
Interface configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp arp-guard isolate-period 180
Command Description
arp-guard
isolate-period
Set the global isolate period.
Related
commands
show nfpp
arp-guard
summary
Show the configurations.
15.2.12 nfpp arp-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
nfpp arp-guard policy { per-src-ip | per-src-mac | per-port } rate-limit-pps
attack-threshold-pps
Parameter Description
per-src-ip
Set the rate-limit threshold and the
attack threshold for each source IP
address.
per-src-mac
Set the rate-limit threshold and the
attack threshold for each source
MAC address.
per-port
Set the rate-limit threshold and the
attack threshold for each port.
Parameter
description
rate-limit-pps
Set the rate-limit threshold with the
valid range of [1, 9999].