Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 460 / 1191

S2600E/P CLI Reference Guide Chapter 2 MLD Snooping Commands
2.1.7 ipv
Use this command to set t the maximum response time of the MLD general
query packet. Use th this com re it to the default value.
i y-max-respons
no ipv6 mld snooping query-max-response
6 mld snooping query-max-response-time
e no form of mand to resto
pv6 mld snooping quer e-time time
-time
Parameter Description
Parameter
Set the maximum response time of
the MLD general query packet, in
seconds. The valid range is 1-65535.
description
time
Default
Settings 10s.
Command
mode Global configuration mode.
Usage
guidelines
longest
value. When the timer value
ow on the interface, and the
Layer-2 device removes this interface from the MLD
p,
Upon receiving the MLD general query packets, the
Layer-2 multicast device updates the aging timer of all
member ports. The time of the timer is the
response value. When the timer value decreases to 0, it
indicates that there is no member receiving the multicast
flow on the interface, and the Layer-2 device removes this
interface from the MLD Snooping forwarding list.
Upon receiving the MLD specific group query packets, the
Layer-2 multicast device enables the aging timer of all
member ports in this specific group. The time of the timer
is the longest response
decreases to 0, it indicates that there is no member
receiving the multicast fl
Snooping forwarding list.
For the source query packets of the MLD specific grou
the timer is not updated.
Examples
following example shows how to set the maximum
ponse time of the MLD general query packet as 15s:
The
res
Ruijie(config)# ipv6 mld snooping
query-max-response-time 15