Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 277 / 1191

S2600E/P CLI Reference Guide Chapter 3 IPv6 Configuration Commands
Usage
guidelines It is used to set the hopcount of the RA message.
Examples
Ruijie(config -if)# ipv6 nd ra-hoplimit 110
Command Description
show ipv6
interface
Show the interface information.
ipv6 nd
ra-lifetime
Set the lifetime of the device.
ipv6 nd
ra-interval
Set the interval of sending the RA
message.
Related
commands
ipv6 nd ra-mtu
Set the MTU of the RA message.
3.1.13 ipv6 nd ra-interval
Use this command to set the interval of sending the RA. Use the no form of this
command to restore it to the default setting.
ipv6 nd ra-interval { seconds | min-max min_value max_value }
no ipv6 nd ra-interval
Parameter Description
seconds
Interval of sending the RA message in
seconds, 3-1800s.
min-max
Maximum and minimum interval
sending the RA message in seconds
min_value
Minimum interval sending the RA
message in seconds
Parameter
description
max_value
Maximum interval sending the RA
message in seconds
Default
configuration
200s. The actual interval of sending the RA message will
be fluctuated 20% based on 200s.
Command
mode Interface configuration mode.
Usage
guidelines
If the device serves as the default device, the set interval
shall not be longer than the lifetime of the device. Besides,