Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 745 / 1191

S2600E CLI Reference Guide Chapter 12 IP Source Guard Configuration Commands
Command
mode Interface configuration mode.
Usage
guidelines
This command enables IP Source Guard function on the
interface to do IP-based or IP+MAC-based detection.
IP Source Guard takes effect only on DHCP Snooping
untrusted port. In other words, IP Source Guard does not
take effect when configuring it on Trust port or the port
which is not controlled by DHCP Snooping.
Examples
The following example configures IP Source Guard on
fastEthernet 0/1:
Ruijie# configure terminal
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# ip verify source
Ruijie(config-if)# end
Command Description
Related
commands
show ip verify
source
View user filtering entry of IP Source
Guard.
Platform
description
This command is supported on all switches.
12.3 Other IP Source Guard
Commands
12.3.1 show ip source binding
Use this command to view the binding information of IP source address and database.
show ip binding [ ip-address ] [ mac-address ] [ dhcp-snooping ] [ static ] [ vlan vlan-id ]
[ interface interface-id ]
Parameter Description Parameter
description
ip-address Show user binding information of