Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 93 / 1191

S2600E/P CLI Reference Guide Chapter 1 Interface Configuration Commands
auto-select
Auto-select the medium type for the
interface.
copper
Copper interface.
Default
configuration
Copper interface.
Command
mode
Interface configuration (physical interface, except for AP
and SVI)
Usage
guidelines
If a port can be selected as an optical port or electrical
port, you can only select one of them. Once the media type
is selected, the attributes of the port, for example, status,
duplex, flow control, and rate, all mean those of the
currently selected media type. After the port type is
changed, the attributes of the new port type take the
default values, which can be modified as needed.
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# medium-type copeer
Command Description
Related
commands
show interfaces
Show the interface information.
Platform
description
-
1.1.13 mtu
Use this command to set the MTU supported on the interface.
mtu num
Parameter Description
Parameter
description
num
64 to 9216 (or 65536, which varies by
products)
Default
configuration
By default, the num is 1500.