Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 274 / 1191

S2600E/P CLI Reference Guide Chapter 3 IPv6 Configuration Commands
Parameter Description
Parameter
description
milliseconds
Interval for retransmitting NS in the
range of 1000 to 429467295
milliseconds
Default
configuration
The default value in RA is 0 (unspecified); the interval for
retransmitting NS is 1000ms(1s).
Command
mode Interface configuration mode.
Usage
guidelines
The configured value will be advertised through RA and
will be used by the device itself. It is not recommended to
set a too short interval.
Examples
Ruijie(conifig-if)# ipv6 nd ns-interval 2000
Command Description
Related
commands
show ipv6
interface
Show the interface information .
3.1.11 ipv6 nd prefix
Use this command to configure the address prefix included in the RA. Use the
no form of this command to delete the set prefix or restore it to the default
setting.
ipv6 nd prefix { ipv6-prefix / prefix-length | default }[ [ valid-lifetime
preferred-lifetime ] | [ at valid-date preferred-date ] | [ infinite |
preferred-lifetime ] ] [ no-advertise ] | [[ off-link ] [ no-autoconfig ]]
no ipv6 nd prefix { ipv6-prefix/prefix-length | default }[ [ off-link ]
[ no-autoconfig ] | [ no-advertise ] ]
Parameter Description
ipv6-prefix
IPv6 network ID following the format
defined in RFC4291
prefix-length
Length of the IPv6 prefix. “/” shall be
added in front of the prefix
valid-lifetime
Valid lifetime of the RA prefix received
by the host
Parameter
description
preferred-lifetime
Preferred lifetime of the RA prefix
received by the host