Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 247 / 1191

S2600E/P CLI Reference Guide Chapter 1 IP Address Configuration Commands
Default
configuration
If the ARP response message is not received, the ARP
request message will be sent for 5 times, and then it will
be timed out.
Command
mode
Global configuration mode.
Usage
guidelines
The switch sends the ARP request message frequently,
and thus causing problems like network busy. In this case,
you can set the retry times of the ARP request smaller. In
general, the retry times should not be set too large.
Examples
The following configuration will set the local ARP request
not to be retried.
arp retry times 1
The following configuration will set the local ARP request
to be retried for one time.
arp retry times 2
Command Function
Related
commands
arp retry interval
seconds
Set the retry interval of the
ARP request message.
1.2.5 arp timeout
Use this command to configure the timeout for the ARP static mapping record in
the ARP cache. The no form of this command restores it to the default
configuration.
arp timeout seconds
no arp timeout
Parameter Description
Parameter
description
seconds
The timeout ranging 0 to 2147483
seconds
Default The default timeout is 3600 seconds.