Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 533 / 1191

S2600E CLI Reference Guide Chapter 2 RADIUS Configuration Commands
2.1.6 radius-server timeout
Use this command to set the time for the device to wait for a response from the security server
after retransmitting the RADIUS packet. The no format of this command is used to restore it to
the default setting.
radius-server timeout seconds
no radius-server timeout
Parameter Description
Parameter
description
seconds Timeout in the range 1 to1000 seconds.
Default 5 seconds.
Command
mode Global configuration mode.
Usage
guidelines
Use this command to change the timeout of packet
retransmission.
Examples
The following example sets the timeout to 10 seconds:
Ruijie(config)# radius-server timeout 10
Command Description
radius-server
host
Define the RADIUS security server.
radius-server
retransmit
Define the number of the RADIUS
packet retransmissions.
Related
commands
radius-server
key
Define a shared password for the
RADIUS server.
2.1.7 radius-server
dead-ctriteria
This global configuration command is used to configure criteria on a device to determine that
the Radius server is unreachable. The no form of this command is used to restore the default
value.
radius-server dead-criteria { time seconds [ tries number ] | tries number }
no radius-server dead-criteria { time seconds [ tries number ] | tries number }