Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 462 / 1191

S2600E/P CLI Reference Guide Chapter 2 MLD Snooping Commands
Command
mode Global configuration mode.
Usage
guidelines
dynamically-learned mroute
interfaces. With the source port check enabled, only the
multicast flow through the mroute interface are valid and
With the source port check function enabled, use the
learned m es to improve the mld
The mrouter interface is the interface of the multicast
device connected with the peer device. By default, the
dynamically-learned mroute interface is enabled on the
layer-2 multicast device. Use the no option to disable this
function and clear all
forwarded to the registered interface on the layer-2
multicast device. Those multicast flow through the
non-mroute interface are invalid and will be discarded.
dynamically- route interfac
snooping flexibility.
Examples
T g example dynamic
multicast route port learn function:
d snooping vlan 1 mrouter learn
he followin shows how to enable the
Ruijie(config)# ipv6 ml
Command Description
Related
ipv6 mld snooping
rface.
commands
vlan mrouter
interface Set the mrouter inte
2.1.10 ipv6 mld snooping vla interfa
U and to set the static mro ace. Use the no form of this
command to delete a r
ipv6 mld snooping vlan vid mrouter interface interface-id
n ld snooping vlan vid mrouter interface interface-id
n mrouter ce
se this comm uter interf
static mrouter inte face.
o ipv6 m
Parameter Description
vid
The vlan id, with the valid range
1-4094.
Parameter
ce number.
description
Interface-id The interfa
Default
Settings N/A.