Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 348 / 1191

S2600E CLI Reference Guide Chapter 1 SNMP Configuration Command
md5
Enable the MD5 authentication protocol.
While the sha enables the SHA
authentication protocol.
aclnumber
Sequence number of the ACL in the
range of 1 to 99, which specifies the IPV4
address range of the NMS that are
permitted to access the MIB.
aclname
Name of the ACL, which specifies the
IPV4 address range of the NMS that are
permitted to access the MIB.
ipv6_aclname
Name of the IPv6 ACL, which specifies
the IPv6 address range of the NMS that
are permitted to access the MIB
Default
configuration
N/A.
Command
mode
Global configuration mode.
Examples
The example below configures an SNMPv3 user with MD5
authentication and DES encryption:
Ruijie(config)# snmp-server user user-2 mib2user v3 auth
md5 authpassstr priv des56 despassstr
Command Description
Related
commands
show snmp
user
Show the SNMP user configuration.
1.1.15 snmp-server view
Use this command to set a SNMP view in the global configuration mode . The
no form of this command is sued to delete the view.
snmp-server view view-name oid-tree { include | exclude }
no snmp-server view view-name [ oid-tree ]
Parameter Description
view-name View name
Parameter
description
oid-tree
Specify the MIB object to associate with
the view.