Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 1175 / 1191

S2600E CLI Reference Guide Chapter 7 Syslog Configuration Commands
configuration
Command
mode
Global configuration mode.
Usage
guidelines
By default, the source address of the log messages sent to
the syslog server is the address of the sending interface.
For easy tracing and management, this command can be
used to fix the source address of all log messages as an
address, so that the administrator can identify which
device is sending the message through the unique
address. If no IP address is configured for the device, the
source IP address of the log message is still that of the
interface from which the message is sent.
Examples
The example below specifies the 192.168.1.1 as the
source address of the syslog messages:
Ruijie(config)# logging source ip 192.168.1.1
Command Description
Related
commands
logging Record logs to the Syslog server.
7.1.13 logging synchronous
Use this command to enable synchronization function of user input and log
output in the line configuration mode to prevent the user from interrupting when
keying in the characters. The no form of this command disables this function.
logging synchronous
no logging synchronous
Parameter
description
N/A.
Default
configuration
Disabled.
Command
mode Line configuration mode.