Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 806 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
show nfpp
dhcpv6-guard
summary
Show the configurations.
show nfpp
dhcpv6-guard hosts
Show the monitored host list.
clear nfpp
dhcpv6-guard hosts
Clear the isolated host.
15.4.5 dhcpv6-guard
monitored-host-limit
Use this command to set the maxmum monitored host number.
dhcpv6-guard monitored-host-limit number
Parameter Description
Parameter
description
number
The maximum monitored host
number. The valid range is
1-4294967295.
Default
Settings 1000
Command
mode NFPP configuration mode
Usage
guidelines
If the monitored host number has reached the default
1000, the administrator shall set the max-number smaller
than 1000 and it will prompt the message that
%ERROR
：
The
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
hosts.
to remind the administrator of the invalid
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts the message that
%
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit
of 1000 monitored hosts.to
remind the administrator.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcpv6-guard monitored-host-limit
200