Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 805 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
Command Description
nfpp dhcpv6-guard
isolate-period
Set the isolate time on the
interface.
Related
commands
show nfpp
dhcpv6-guard
summary
Show the configurations.
15.4.4 dhcpv6-guard
monitor-period
Use this command to configure the monitor time.
dhcpv6-guard monitor-period seconds
Parameter Description
Parameter
description
seconds
Set the monitor time, in seconds. The
valid range is [180, 86400].
Default
Settings
600s
Command
mode
NFPP configuration mode.
Usage
guidelines
When the attacker is detected, if the isolate period is
0, the attacker will be monitored by the software and the
timeout time will be the monitor period. During the
software monitoring, if the isolate period is not 0, the
software-monitored attacker will be auto-isolated by the
hardware and the timeout time will be the isolate period.
The monitor period is valid with the isolate period 0.
If the isolate period has changed to be 0, the
attackers on the interface will be removed rather than
being monitored by the software.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcpv6-guard monitor-period 180
Related Command Description