Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 81 / 1191

S2600E/P CLI Reference Guide Chapter 5 Network Connectivity Test Tool
Configuration Commands
12 219.142.11.10 40 msec 50 msec 30 msec
13 211.157.37.14 50 msec 40 msec 50 msec
14 222.35.65.1 40 msec 50 msec 40 msec
15 222.35.65.18 40 msec 40 msec 40 msec
16 222.35.15.109 50 msec 50 msec 50 msec
17 * * *
18 64.170.98.32 40 msec 40 msec 40 msec
Platform
description
-
5.1.4 traceroute
ipv6
Use this command to show all gateways passed by the test packets from the
source address to the destination address.
traceroute [ ipv6 ] [ ip-address [ probe number ] [ timeout seconds ] [ ttl
minimum maximum ] ]
Parameter Description
Ipv6-address Specifies an IPv6 address.
number
Specifies the number of probe packets
to be sent.
seconds Specifies the timeout time.
Parameter
description
minimum
maximum
Specifies the minimum and maximum
TTL values.
Command
mode Privileged mode.
Usage
guidelines
Use the traceroute ipv6 command to test the connectivity
of a network to exactly locate the network connectivity
problem when the network failure occurs. To use the
function domain name, configure the domain name server.
For the concrete configuration, refer to the DNS
Configuration part.
Examples
The following is two examples of the application bout
traceroute ipv6, the one is of the smooth network, and the
other is the network in which some gateways aren’t
connected successfully.
1. When the network is connected smoothly: