Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 1164 / 1191

S2600E CLI Reference Guide Chapter 7 Syslog Configuration Commands
Critical 2 Critical conditions
Errors 3 Error message
warnings 4 Alarm information
Notifications 5
Information that is normal but
needs attention
informational 6 Descriptive information
Debugging 7 Debugging messages
Lower value indicates higher level. That is, level 0 indicates
the information of the highest level.
When the level of log information to be displayed on specified
device, the log information is at or below the set level will not
be displayed.
Caution
After running the system for a long time,
modifying the log buffer size especially in
condition of large buffer may fails due to the
insufficent availble continuous memory. The
failure message will be shown. It is
recommended to modify the log buffer size as
soon as the system starts.
Examples
The configuration example below allows logs at and below
severity 6 to be recorded in the memory buffer sized
10,000 bytes.
Ruijie(config)# logging buffered 10000 6
Command Description
logging on
Record logs on different devices.
show logging Show the logs in the buffer.
Related
commands
clear logging Clear the logs in the log buffer.
7.1.3 logging console
Use this command to set the severity of logs that are allowed to be displayed on
the console. The no format of the command disables displaying the logs on the
console.
logging console level
no logging console