Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 73 / 1191

S2600E/P CLI Reference Guide Chapter 4 LINE Configuration Commands
default transport input
Parameter Description
all
Allow all the protocols under Line to be
used for communication
ssh
Allow only the SSH protocol under Line
to be used for communication
telnet
Allow only the Telnet protocol under
Line to be used for communication
Parameter
description
none
Allow none of protocols under Line to be
used for communication
Default
configuration
By default, VTY allows all the protocols to be used for
communication. The default value of other types of TTYs
is NONE, indicating that no protocols are allowed for
communication. After some protocols are set to be
available for communication, use the default transport
input command to restore the setting to the default value.
Command
mode Line configuration mode.
Usage
guidelines
This command is used to set the protocols in the Line
mode that are available for communication. By default,
VTY allows all the protocols for communication. After
protocols available for communication are set, only these
protocols can connect on the specific VTY successfully.
Use the show running command to view configuration
information under Line.
Note: You can restore the default configuration by using
the default transport input command. The no
transport input command is used to disable all the
communication protocols in the LINE mode. The setting
result is the same as that of transport input none .
Examples
Specify that only the Telnet protocol is allowed to login in
line vty 0 4:
Ruijie# configure terminal
Ruijie(config)# line vty 0 4
Ruijie(config-line)# transport input telnet