Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 72 / 1191

S2600E/P CLI Reference Guide Chapter 4 LINE Configuration Commands
Examples
Enter the LINE mode from LINE VTY 1 to 3:
Ruijie(config)# line vty 1 3
Related
commands N/A.
4.1.3 line vty
This command can be used to increase the number of VTY connections
currently available. The number of currently available VTY connections can be
decreased by using the no form of this command.
line vty line-number
no line vty line-number
Default
configuration
By default, there are five available VTY connections,
numbered 0--4.
Command
mode Global configuration mode.
Usage
guidelines
When you need to increase or decrease the number of
available VTY connections, use the above commands.
Examples
Increase the number of available VTY connections to 20.
The available VTY connections are numbered 0--19.
Ruijie(config)# line vty 19
Decrease the number of available VTY connections to 10.
The available VTY connections are numbered 0-9.
Ruijie(config)# line vty 10
Related
commands N/A.
4.1.4 transport
input
To set the specified protocol under Line that can be used for communication,
use the transport input command. Use default transport input to restore
the protocols under Line that can be used for communication to the default
value.
transport input {all | ssh | telnet | none}