Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 290 / 1191

S2600E/P CLI Reference Guide Chapter 3 IPv6 Configuration Commands
L | !L
L: Indicate that the on-link in the prefix is
set.
!L: Indicate that the on-link in the prefix is
not set.
A | !A
A: Indicate that the auto-configure in the
prefix is set. !A: It indicates that the
auto-configure in the prefix is not set.
3.2.5 show ipv6 neighbors
Use this command to show the IPv6 neighbors.
show ipv6 neighbors [ verbose ] [ interface-id ] [ ipv6-address ]
show ipv6 neighbors static
Parameter Description
verbose Show the neighbor details.
static
Show the validity status of static
neighbors.
interface-id
Show the neighbors of the specified
interface.
Parameter
description
ipv6-addres
Show the neighbors of the specified
IPv6 address.
Command
mode
Privileged mode.
Usage
guidelines
Show the neighbors on the SVI 1 interface:
Ruijie# show ipv6 neighbors vlan 1
IPv6 Address Linklayer Addr Interface
fa::1 00d0.0000.0002 vlan 1
fe80::200:ff:fe00:2 00d0.0000.0002 vlan 1
Show the neighbor details:
Ruijie# show ipv6 neighbors verbose
IPv6 Address Linklayer Addr Interface
2001::1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
fe80::200:ff:fe00:1 00d0.f800.0001 vlan 1
State: Reach/H Age: - asked: 0
Field Meaning
IPv6 Address IPv6 address of the Neighbor
Linklayer Addr
Link address, namely, MAC address. If it is
not available, incomplete is displayed.