Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 433 / 1191

S2600E/P CLI Reference Guide Chapter 1 IGMP Snooping Commands
Usage
guidelines
After you execute this command to enable the suppression
function, the switch begins to suppress the IGMP v1/v2
report messages.
Examples
The following example shows how to enable IGMP
snooping suppression on the device:
Ruijie(config)# ip igmp snooping suppression
Related
commands
N/A
1.1.20 ip igmp snooping tunnel
Configure the relationship between IGMP Snooping and QinQ:
ip igmp snooping tunnel
no ip igmp snooping tunnel
Parameter Description
Parameter
description
- -
Default IGMP Passthrough is disabled.
Command
mode
Global configuration mode.
Usage
guidelines
After IGMP Snooping is enabled and dot1q-tunnel
port is configured on the device, IGMP packets
received from dot1q-tunnel port will be handled in
two ways through IGMP Snooping:
„
1st way: Create multicast entries in the VLAN to
which the IMGP packets belong, and forward
IMGP packets in such VLAN.
For example: It is assumed that IGMP Snooping
has been enabled on the device; port A is a
dot1q-tunnel port; the default VLAN of port A is
VLAN 1, and packets from VLAN 1 and VLAN
10 can pass through port A. When multicast