Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 430 / 1191

S2600E/P CLI Reference Guide Chapter 1 IGMP Snooping Commands
1.1.16 ip igmp snooping querier version
Currently, the IGMP Snooping querier supports IGMPv1 and IGMPv2. To
specify the version, execute the global configuration command of " ip igmp
snooping querier version ". Use no form of this command to restore to the
default setting.
ip igmp snooping querier version num
no ip igmp snooping querier
Parameter Description
Parameter
description
num
IGMP version number
(1-2). Default value: 2.
Default IGMPv2
Command
mode
Global configuration mode.
Usage
guidelines
If the IGMP querier version number has been configured
in the corresponding VLAN, the value specified in VLAN
will be used first.
Examples
The following example configures IGMP querier version
on the device:
Ruijie(config)# ip igmp snooping querier version 1
Command Description
Related
commands
- -
1.1.17 ip igmp snooping query-max-response-time
This command specifies the time for the switch to wait for the member join
message after receiving the query message. If the switch does not receive the
member join message within the specified time, it considers that the member
has left and then deletes the member.
ip igmp snooping query-max-response-time time
no ip igmp snooping query-max-resposne-time