Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 900 / 1191

S2600E CLI Reference Guide Chapter 1 ACL Configuration Commands
to 2699, 3000 to 3199).
Platform
description The software version must be RGOS10.0 and higher.
1.1.6 ip access-list
Use this command to create a standard IP ACL or extended IP ACL. Use the no
form of the command to remove the ACL.
ip access-list { extended | standard } { id | name }
no ip access-list { extended | standard } { id | name }
Parameter Description
id ID of the ACL 1 to 99 and 1300 to 1999
for standard ACL) or 100 to 199 and
2000 to 2699 for extended ACL
Parameter
description
name Name of the ACL
Default
configuration N/A.
Command
mode Global configuration mode.
Usage
guidelines
There are differences between a standard ACL and an
extended ACL. The extended ACL is more precise. Refer
to deny or permit in the two modes. Use show
access-lists to display the ACL configurations .
Examples
Create a standard ACL:
Ruijie(config)# ip access-list extended 123
Ruijie(config-ext-nacl)# show access-lists
ip access-list extended 123
Ruijie(config-ext-nacl)#
Create an extended ACL:
Ruijie(config)# ip access-list standard std-acl
Ruijie(config-std-nacl)# show access-lists
ip access-list standard std-acl
Ruijieconfig-std-nacl)#