Ruijie Networks RG-S2600E Series, Cli Reference Manual

Page: 1070 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
Test_Counter op set value 0
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
smart manager
applet
Define the command line based SEM
policy.
Related
commands
action counter -
7.1.14 event interface
In SEM configuration mode, use this command to configure statistics on the
monitoring interface of a monitor. Use the no form of this command to delete
the event with the specified name.
event tag event-name [ correlate { andnot | and | or }] interface name
interface-type interface-number parameter counter-name entry-op operator
entry-val entry-value entry-type { value | increment | rate } poll-interval
poll-int-value [ exit-op operator exit-val exit-value exit-type { value | increment
| rate } [ exit-comb { or | and }] [ exit-time exit-time-value ]] [ average-factor
average-factor-value ]
no event tag event-name
Parameter Description
event-name The event name.
correlate { andnot |
and | or }
The relation between the current
event and the combination of the
previous events in the case of
multiple events (optional). The
values are and, or, and andnot.
name interface-type
interface-number
The interface name.
parameter
counter-name
The statistics type of the monitoring
interface.
Parameter
description
entry-op operator The method that triggers
comparison:
eq: equal to
ge: greater than or equal to
gt: greater than
le: less than or equal to
lt: less than